Extrusion line stats report printing with NEXiS CS3G control unit

The NEXiS™ CS3G control system is a powerful and easy-to-operate control system for extrusion lines.  Connected to Proton Products DG Series diameter gauges and CG Series capacitance gauges, a variety of system configurations is possible, including hot and cold diameter control, wall thickness control with automatic shrinkage, and measurement of flat products.

The CS3G already has an impressive range of outputs, including two 10V analogue outputs, PID control, 4 programmable relays,and  RS232/USB.

Print measurement stats reports

Now, report printing is available.  It’s simple to set up and provides a printed record of max and min diameter readings, and the mean and sigma statistical values.  Contact your Proton Products agent if your customers have other printing requirements.

Simple to connect

Connect a report printer to the AUX RS232 port of the CS3G, and a logic input (RTS to GND).

clear format; hard copy for your records

The report print format on the EPSON TM-U220D printer is:
(Different print data and report formats available on special request)

REQUEST A QUOTE

CS3G feedback control unit

Stats report printer

REQUEST A QUOTE

Dual-Axis and Triple-Axis Lump and Neckdown Detection from Proton

Wire and cable manufacturers need outstanding product quality supervision.  Proton Products InteliSENS™ LN Series lump and neckdown detectors deliver that.  LN gauges identify imperfections in the surface of cable and wire, and feed that data to a PC or PLC.

Instant communication and logging of flaw data

The LN Series includes DUAL-AXIS and TRIPLE-AXIS lump and neck detectors have specialized optical technology which examines the product with a constant LED light source.  High-speed digital signal processing (DSP) ensures detection of faults down to a size of 0.04mm (0.00157 inch): any immediate change in the surface profile is detected by the LED optical receiver, Alarming and Reporting the height, length and location of lumps and necks along and around the product.

Simple installation

The InteliSENS™ Lump and Neck Detectors are extremely easy to install, integrate and use.  The LN2030 and LN3030 can both be used as stand-alone devices or integrated to the machine PLC.  Audio-visual alarm, fault report printer and datalogging PC software are available to complement the Lump and Neck Detector, closing the loop on quality control.

Dual-axis or triple-axis: your choice

The 2-axis LN2030 offers a great value LOW COST option, and for applications where almost complete coverage of the product surface is required, the 3-axis LN3030 lump and neck detector is the right choice.

LN3030 lump and

neckdown detector

AiG2-LN: clear, bright display

REQUEST A QUOTE

Applications

LN Series Lump and Neckdown detectors are used in many production processes, including Wire Drawing, Braiding, Cable Insulating and Jacketing, Rewinding and Coiling, Rubber and Plastic Extrusion Processes for Hose, Tube and Pipe production.

Years of maintenance-free operation

Once the LN unit starts measuring, it is set up for years of maintenance-free operation: LN gauges do not touch the product, contain no moving parts and the system is permanantly calibrated.

Increase quality.  Reduce costs.

Contact Proton Products to find out how to lower production costs, reduce customer complaints and improve your reputation as a quality product supplier.

Inspect, Alarm, Report

Audio-visual alarm

Fault report printer

PCIS_LN: PC GUI report and

logging software

Contact: info@protonproducts.com

Download PDF brochure:

REQUEST A QUOTE